http://github.com/timcharper/spork

How to fix the Missing error

http://chrisblunt.com/blog/2009/08/28/rails-configuring-rspec-for-spork/

• https://wiki.ubuntu.com/X/Config/Resolution
• cvt 1680 1050 75
• xrandr –newmode …the output from cvt
  xrandr –newmode “1680x1050_75.00″ 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync
• xrandr –addmode DVI-0 1680x1050_75.00

Lenovo Y510

You have to install the latest alsa.

Then replace the existing kernel modules with the just build one. Then run depmod -a as point kilbasar here

http://ubuntuforums.org/showthread.php?t=687663&page=2

sudo su
cd /lib/modules/2.6.22-14-generic/ubuntu/media/snd-hda-intel/
mv snd-hda-intel.ko snd-hda-intel.ko.bak
ln -s /lib/modules/2.6.22-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko /lib/modules/2.6.22-14-generic/ubuntu/media/snd-hda-intel/snd-hda-intel.ko
cd /usr/src/alsa/alsa-driver-1.0.16rc2/modules
cp * /lib/modules/2.6.22-14-generic/kernel/sound/
depmod -a

Logitech Revolution MX

http://x4.6times7.org/dokuwiki/doku.php/devlog/blog/howto_logitech_mx_revolution_on_ubuntu

• The mouse wheel control
  • Download from here http://goron.de/~froese/revoco/ or revoco-0.5.tar
  • make
  • sudo ./revoco manual=6
  • lets try to add it in ~/.xprofile next time
    

• Here is my xorg.conf

Section "Monitor"
 Identifier "External DVI"
 # 1680x1050 74.89 Hz (CVT 1.76MA) hsync: 82.31 kHz; pclk: 187.00 MHz
 Modeline "1680x1050_75.00"  187.00  1680 1800 1976 2272  1050 1053 1059 1099 -hsync +vsync
 # 1680x1050 59.95 Hz (CVT 1.76MA) hsync: 65.29 kHz; pclk: 146.25 MHz
 Modeline "1680x1050_60.00"  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync
 # 1680x1050 69.88 Hz (CVT) hsync: 76.58 kHz; pclk: 174.00 MHz
 Modeline "1680x1050_70.00"  174.00  1680 1800 1976 2272  1050 1053 1059 1096 -hsync +vsync
 Option "PreferedMode"    "1280x1024_75.00"
EndSection

Section "Screen"
 Identifier    "Configured Screen Device"
 Device    "Configured Video Device"
 SubSection "Display"
 Depth    24
 Modes "1680x1050" "1024x768" "640x480"
 Virtual    2960 1050
 EndSubSection
EndSection

Section "Device"
 Identifier    "Configured Video Device"
 Option    "Monitor-DVI-0" "External DVI"
EndSection

My Development setup commands

I noticed simillar post here

sudo aptitude install mc vim subversion screen pidgin meld curl links2 vim-ruby vim-gnome vim-doc vim-scripts vim-ruby vim-perl \
subversion git-core bluefish kompozer\
libmysqlclient15off libmysqlclient15-dev mysql-common mysql-client \
libmysql-ruby1.8 irb ruby1.8 rdoc ri rake \
apt-utils build-essential ruby1.8-dev mysql-server memcached libxslt1-dev libpcre3-dev zlib1g-dev unzip gzip mytop openssl \
libopenssl-ruby libmagick9-dev imagemagick librmagick-ruby1.8 imagemagick librmagick-ruby-doc  libmagick9-dev ruby1.8-dev \
libdbd-sqlite3-ruby libsqlite3-ruby sqlite3 libsqlite3-dev

ln -s /usr/bin/ruby1.8 /usr/bin/ruby

mkdir ruby_install
cd ruby_install
wget http://rubyforge.org/frs/download.php/60718/rubygems-1.3.5.tgz
tar xzvf ruby*
cd rubygems-1.3.5
ruby setup.rb
cd ..
cd ..

ln -s /usr/bin/gem1.8 /usr/bin/gem

gem install rails mysql mongrel mongrel_cluster rails paperclip will_paginate andand \
json feed-normalizer hpricot mechanize ruby-debug uuid ruport ruport-util acts_as_reportable \
rufus-scheduler annotate openwferu-scheduler production_log_analyzer capistrano-ext libxml-ruby twitter capistrano wirble RedCloth
rspec-rails sqlite3-ruby \
--no-ri --no-rdoc

gem install rmagick -v 1.15.12
ruby -rrubygems -e "require 'RMagick'; puts Magick::Long_version;"

cat > /home/guda/.irbrc
require 'rubygems'
require 'wirble'
Wirble.init
Wirble.colorize
require 'logger'
if ENV.include?('RAILS_ENV') && !Object.const_defined?('RAILS_DEFAULT_LOGGER')
Object.const_set('RAILS_DEFAULT_LOGGER', Logger.new(STDOUT))
end

Gmail notification

http://www.workswithu.com/2009/10/06/gmail-notifier-applets-for-ubuntu/

What about http://ubuntu-tweak.com/

ruby ide http://github.com/danlucraft/redcar/tree/master

require ‘find’
namespace :mysql do
desc “Perform mysql dump on the RAILS_ENV environment”
task :dump => :environment do
db_config = ActiveRecord::Base.configurations[RAILS_ENV]
backup_file = “#{db_config['database']}.sql”
cmd = “mysqldump -u #{db_config['username']} -p#{db_config['password']} -Q –add-drop-table -O add-locks=FALSE -O lock-tables=FALSE #{db_config['database']} -r #{backup_file}”
puts cmd
sh cmd
end

desc “imports the dumped database in the mysql FILE”
task :import => :environment do |t, args|
version = ENV["FILE"] ? ENV["FILE"].to_i : nil
raise “FILE is required” unless version

db_config = ActiveRecord::Base.configurations[RAILS_ENV]
backup_file = ENV["FILE"]
sh “mysql -u #{db_config['username']} -p#{db_config['password']} -e \”CREATE DATABASE IF NOT EXISTS #{db_config['database']}\” ”
sh “mysql -u #{db_config['username']} -p#{db_config['password']} #{db_config['database']} < #{backup_file}”
end

desc “runs the mysql console for the selected RAILS_ENV”
task :console => :environment do
db_config = ActiveRecord::Base.configurations[RAILS_ENV]
backup_file = “#{db_config['database']}.sql”
cmd = “mysql -u #{db_config['username']} -p#{db_config['password']} #{db_config['database']}”
sh cmd
end

end

The task dumps just make a mysql dump from the current environment. Hmm. The next step is to transfer it with scp to my host.

Grab from here the mysql console task

http://www.espace.com.eg/neverblock

http://m.onkey.org/2008/11/17/ruby-on-rack-1

http://m.onkey.org/

http://www.gnome-db.org/Download

http://loriholden.com/

http://www.bestechvideos.com/

Flex

• http://www.adobe.com/devnet/flex/articles/total_training_ch1.html#
• http://www.adobe.com/devnet/flex/learn/programmer/learningpath.html
• http://www.deitel.com/ResourceCenters/Programming/AdobeFlex/AdobeFlexVideos/tabid/1699/Default.aspx

http://conference.startup-bg.org/2008/?page_id=696

Add this line in sources.list to get rails > 1.8.5 in rails etch

deb http://www.backports.org/debian etch-backports main contrib non-free
# deb ftp://ftp.nz.debian.org/backports etch-backports main contrib non-free
apt-get install debian-backports-keyring
aptitude update

# some ruby stuff
aptitude install -t etch-backports ruby1.8-dev libmysqlclient15off libmysqlclient15-dev mysql-common mysql-client libmysql-ruby1.8

# some system utils/libs
aptitude install apt-utils build-essential mysql-server mysql-common mysql-client memcached libxslt1-dev libpcre3-dev zlib1g-dev unzip gzip mytop  openssl

aptitude install -t etch-backports libopenssl-ruby

# gems
gem install rails mongrel mongrel_cluster -y

check this step-by-step

Image magick linux howto – http://rmagick.rubyforge.org/install2-linux.html

aptitude install libmagick9-dev  imagemagick librmagick-ruby1.8 imagemagick librmagick-ruby-doc  libmagick9-dev ruby1.8-dev

# for version 1 of imagemagick we use this rmagick, else try it without the -v
gem install rmagick -v 1.15.12 

# lets test it
> irb
require 'rubygems'
require 'RMagick'
Magick::CenterGravity
puts Magick::Long_version

# or with 

ruby -rrubygems -e "require 'RMagick'; puts Magick::Long_version;" 

I love this tutorial on rubyinside

The interesting part is the final flag which tells the syslog not to process any further the message. This way the message stays only in the rails application logfile.

log { source(src); filter(f_rails); destination(rails_log); flags(final); };

Here is the whole conf file


options {
chain_hostnames(off);
sync(0);dns_cache(2000);
dns_cache_expire(87600);
# The default action of syslog-ng 1.6.0 is to log a STATS line
# to the file every 10 minutes. That's pretty ugly after a while.
# Change it to every 12 hours so you get a nice daily update of
# how many messages syslog-ng missed (0).
stats(43200);
};

destination messages { file(“/var/log/messages”); };

# By default messages are logged to tty12…
# destination console_all { file(“/dev/tty12″); };
# …if you intend to use /dev/console for programs like xconsole
# you can comment out the destination line above that references /dev/tty12
# and uncomment the line below.
#destination console_all { file(“/dev/console”); };

source src {
unix-stream(“/dev/log” max-connections(256));
internal();
file(“/proc/kmsg”);
};

destination rails_log { file(“/var/log/system3.log”); };
filter f_rails { program(“rails.*”); };
log { source(src); filter(f_rails); destination(rails_log); flags(final); };

log { source(src); destination(messages); };
log { source(src); destination(console_all); };

On my last Debian Etch installation I have to commeted the “source src” and added just those lines

# we will use the default source configuration

#source src {
#unix-stream(“/dev/log” max-connections(256));
#internal();
#file(“/proc/kmsg”);
#};

destination rails_log { file(“/var/log/system3.log”); };
filter f_rails { program(“rails.*”); };
log { source(s_all); filter(f_rails); destination(rails_log); flags(final); };

Put this at the beginig of the log {} directives because we need want the final flag to take affect.

http://www.blueboxgrp.com/news/2009/06/unified_rails_logging_with_syslog-ng

Very nice tutorial for rails 2.1 caching.

API references: Fragments, Sweepers, the Store

Post how to move the page cache in a folder with some server examples

Observing Controllers with Sweepers

Here is described how you can use the Sweepers to observe controller actions. I totaly agree that the documenation is very bad on the sweepers and it is like a rule book of MTG than usefull rdoc.

Here is what I have found on the naming of the callbacks.

Checking the source code in sweeping.rb shows that the callbacks that are used for the controller are constructed in this way:

controller_callback_method_name = "#{timing}_#{controller.controller_name.underscore}"
action_callback_method_name = "#{controller_callback_method_name}_#{controller.action_name}"

This means that the method which will be called in the sweeper will be named

• after/before_user – for the controller UserController
• after/before_user_login – for the action login in the controller UserController

Here is an example.

class Dagens::UserController < Dagens::BaseController
  cache_sweeper DagensAgentSweeper, :only => [:do_login, :do_delete_account, :do_logout]
  def do_login
  end
  ....
end

class DagensAgentSweeper < ActionController::Caching::Sweeper
  observe DagensAgent

  def after_user_do_login
    puts "after do login \n \n \n \n \n \n \n "
    expire_cache_for(@logged_user)
  end
end

Skipping callbacks from an observer

I know that it is not good idea, but some times there is no time/way to do skip it. I have found a plugin and this post here. I have choose to use the second one in my project. Here is the example

class DagensAgentSweeper < ActionController::Caching::Sweeper
  observe DagensAgent

  def self.skip_callback(callback, &block)
    method = instance_method(callback)
    remove_method(callback) if respond_to?(callback)
    define_method(callback) { true }
    result = yield
    remove_method(callback)
    define_method(callback, method)
    result
  end
........
end

And later in the controller….model…

      DagensAgentSweeper.skip_callback(:after_update) do
        @agent.shown_times += 1
        @agent.save
      end

timed_fragment_cache

Some patches on the timed_fragment_cache plugin.

Note how Jolyon Says suggest to expire the cache when you have time zone : when_fragment_expired ‘tags_home_page’, Time.now + 10.minutes do

I have notice that timed_fragment_cache (or the patch) have a problem with expiring the cache from the controller. In the documenation it is stated that it is ok to expire the cache only in the controller with

when_fragment_expired  "_last_update",  Time.now + 1.minutes  do

and there is no need to expire it in the view, but you MUST expire it in the view.

cache "_last_update" do

must be

cache "_last_update", Time.now + 1.minutes  do

with fair balancing

Fair load balancing for nginx from here

./configure  --with-http_ssl_module --user=mongre --add-module=/usr/local/src/gnosek-nginx-upstream-fair --prefix=/usr/local/nginx --error-log-path=/var/log --http-log-path=/var/log 

make && make install

base configuration from here
more and my favorite here is good overview of example config
init script from here

http://haproxy.1wt.eu/ is alternative for the nginx

I have one mongrel cluster which is serving multiple rails applications. In my example I host http://system3.spider.bg and http://www.psspy.se in one mongrel cluster. here are the conf files:

# cat nginx.conf
user  mongrel mongrel;
worker_processes  2;

#error_log  logs/error.log;
error_log  logs/error.log  notice;
#error_log  logs/error.log  info;

#pid        logs/nginx.pid;

events {
    #worker_connections  16385;
    worker_connections  1024;
}

http {
    default_type  application/octet-stream;
    include       mime.types;

    log_format  main  '$remote_addr - $remote_user [$time_local] $request '
                      '"$status" $body_bytes_sent "$http_referer" '
                      '"$http_user_agent" "$http_x_forwarded_for"';

    access_log  logs/access.log  main;
    server_tokens off;

    sendfile        on;
    tcp_nopush     on;
    tcp_nodelay    on;

    #keepalive_timeout  0;
    keepalive_timeout  65;

    gzip  on;
    gzip_proxied any;
#    gzip_http_version 1.1;
#    gzip_comp_level 1;
    gzip_types      text/plain text/html text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript;

    upstream truckhandboken_proxy {
        server 127.0.0.1:8000;
        server 127.0.0.1:8001;
    }

    upstream system3_proxy {
        server 127.0.0.1:8200;
        server 127.0.0.1:8201;
        server 127.0.0.1:8202;
        server 127.0.0.1:8203;
        server 127.0.0.1:8204;
        server 127.0.0.1:8205;
        server 127.0.0.1:8206;
        server 127.0.0.1:8207;
        server 127.0.0.1:8208;
        server 127.0.0.1:8209;
    }

    include     vhosts/*.conf;

    server {
        listen       80;
        server_name  localhost:80;

        #charset koi8-r;

        #access_log  logs/host.access.log  main;

        location / {
            root   html;
            index  index.html index.htm;
        }

        #error_page  404              /404.html;

        # redirect server error pages to the static page /50x.html
        #
        error_page   500 502 503 504  /50x.html;
        location = /50x.html {
            root   html;
        }

        # proxy the PHP scripts to Apache listening on 127.0.0.1:80
        #
        #location ~ \.php$ {
        #    proxy_pass   http://127.0.0.1;
        #}

        # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
        #
        #location ~ \.php$ {
        #    root           html;
        #    fastcgi_pass   127.0.0.1:9000;
        #    fastcgi_index  index.php;
        #    fastcgi_param  SCRIPT_FILENAME  /scripts$fastcgi_script_name;
        #    include        fastcgi_params;
        #}

        # deny access to .htaccess files, if Apache's document root
        # concurs with nginx's one
        #
        #location ~ /\.ht {
        #    deny  all;
        #}
    }

    # another virtual host using mix of IP-, name-, and port-based configuration
    #
    #server {
    #    listen       8000;
    #    listen       somename:8080;
    #    server_name  somename  alias  another.alias;

    #    location / {
    #        root   html;
    #        index  index.html index.htm;
    #    }
    #}

    # HTTPS server
    #
    #server {
    #    listen       443;
    #    server_name  localhost;

    #    ssl                  on;
    #    ssl_certificate      cert.pem;
    #    ssl_certificate_key  cert.key;

    #    ssl_session_timeout  5m;

    #    ssl_protocols  SSLv2 SSLv3 TLSv1;
    #    ssl_ciphers  ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP;
    #    ssl_prefer_server_ciphers   on;

    #    location / {
    #        root   html;
    #        index  index.html index.htm;
    #    }
    #}
}

The virtual host file

# cat system3.conf
    server {
        listen       80;
        #listen      192.168.1.1;
        #listen      192.168.1.1:8080;

        server_name  system3.spider.bg www.system3.spider.bg;

        access_log  logs/system3.access.log  main;

        location / {
            proxy_pass         http://system3_proxy;
            proxy_redirect     off;

            proxy_set_header   Host             $host;
            proxy_set_header   X-Real-IP        $remote_addr;
            proxy_set_header   X-Forwarded-For  $proxy_add_x_forwarded_for;

            client_max_body_size       10m;
            client_body_buffer_size    128k;

            proxy_connect_timeout      90;
            proxy_send_timeout         90;
            proxy_read_timeout         90;

            proxy_buffer_size          4k;
            proxy_buffers              4 32k;
            proxy_busy_buffers_size    64k;
            proxy_temp_file_write_size 64k;
        }
    }

server {
        listen       80;
        #listen      192.168.1.1;
        #listen      192.168.1.1:8080;

        server_name  *.psspy.se psspy.se;
        root    /home/mongrel/system3/current/public;
        access_log  logs/psspy_access.log  main;

        # Set the max size for file uploads to 50Mb
        client_max_body_size 50M;

        # this rewrites all the requests to the maintenance.html
        # page if it exists in the doc root. This is for capistrano's
        # disable web task
        if (-f $document_root/system/maintenance.html) {
            rewrite  ^(.*)$  /system/maintenance.html last;
            break;
        }

        location = / {
            if (-f /index.html){
             rewrite (.*) /index.html last;
            }
            proxy_pass  http://system3_proxy/dagensps;

            proxy_redirect     off;

            proxy_set_header   Host             $host;
            proxy_set_header   X-Real-IP        $remote_addr;
            proxy_set_header   X-Forwarded-For  $proxy_add_x_forwarded_for;
        }

        location / {
            proxy_redirect     off;

            proxy_set_header   Host             $host;
            proxy_set_header   X-Real-IP        $remote_addr;
            proxy_set_header   X-Forwarded-For  $proxy_add_x_forwarded_for;

            client_max_body_size       10m;
            client_body_buffer_size    128k;

            proxy_connect_timeout      90;
            proxy_send_timeout         90;
            proxy_read_timeout         90;

            proxy_buffer_size          4k;
            proxy_buffers              4 32k;
            proxy_busy_buffers_size    64k;
            proxy_temp_file_write_size 64k;

            # If the file exists as a static file serve it directly without
            # running all the other rewite tests on it
            if (-f $request_filename) {
                break;
            }

            # check for index.html for directory index
            # if its there on the filesystem then rewite
            # the url to add /index.html to the end of it
            # and then break to send it to the next config rules.
            if (-f $request_filename/index.html) {
                rewrite (.*) $1/index.html break;
            }

            # this is the meat of the rails page caching config
            # it adds .html to the end of the url and then checks
            # the filesystem for that file. If it exists, then we
            # rewite the url to have explicit .html on the end
            # and then send it on its way to the next config rule.
            # if there is no file on the fs then it sets all the
            # necessary headers and proxies to our upstream mongrels
            if (-f $request_filename.html) {
               rewrite (.*) $1.html break;
            }

            if (!-f $request_filename) {
              proxy_pass         http://system3_proxy;
              break;
            }
        } # location

    error_page   500 502 503 504  /500.html;
    location = /500.html {
      root   /home/mongrel/system3/current/public/500.html;
    }

    error_page   404  /404.html;
    location = /404.html {
      root   /home/mongrel/system3/current/public/404.html;
    }

}# server

Good text: http://rubypond.com/articles/2008/02/01/setting-up-nginx-ssl-and-virtual-hosts/
There is generartor gem nginx_config_generator
example scripts: http://topfunky.net/svn/shovel/nginx/

nginx connects directly to memcached for caching
for restarting nice you might want to see seesaw gem (presentation here) or this blog

I have one old application where the attachment is store as an id in the filesystem. The customer wants to have the attachment with the right name. So I have made this small action which accepts the id of the requested object and send the file data.

  def send_bios
    redirect_to :action => 'bios' if params[:id].blank?
    @artist = Artist.find(params[:id]);
    contents = File.open(@artist.bios_path,"rb") {|io| io.read}
    send_data contents, :filename => "#{@artist.name}.pdf", :type => "application/pdf", :disposition => 'attachment'
  end

First you must put your images in a folder /public/images/random_images or what ever.

Second you put images there and mark the filenames with a prefix, which image to which section will be visible on.

index_bottom_1.jpg -> for the index page on the bottom :)

index_bottom_2.jpg -> for the index page on the bottom

featured_art_1.jpg -> some panel.

featured_art_2.jpg -> some panel.

and so on…

Paste this method in your base controller. This method will be called to make list for a specific image folder and “filter” the images that are supposed to be showed in the different regions in @variables.

  before_filter :init_random_images
  protected # :) be carefull for this if you copy paste
  def init_random_images
    # collect some static images
    web_root = "images/imagestorage/random_images"

    all_images = Dir["#{RAILS_ROOT}/public/#{web_root}/*.jpg"]

    @random_head_images = []
    @random_indexbtm = []
    @random_featured = []
    @random_sales = []
    @random_services = []
    @random_framing = []
    @random_artistcollection = []
    all_images.each do |f|
      if File.stat(f).file?
        @random_head_images << ("/#{web_root}/" + File.basename(f)) if f =~ /head_images_/
        @random_indexbtm << ("/#{web_root}/" + File.basename(f)) if f =~ /indexbtm_/
        @random_featured << ("/#{web_root}/" + File.basename(f)) if f =~ /featured_/
        @random_sales << ("/#{web_root}/" + File.basename(f)) if f =~ /sales_/
        @random_services << ("/#{web_root}/" + File.basename(f)) if f =~ /services_/
        @random_framing << ("/#{web_root}/" + File.basename(f)) if f =~ /framing_/
        @random_artistcollection << ("/#{web_root}/" + File.basename(f)) if f =~ /artistcollection_/
      end
    end

Then paste this as a helper or in the base controller, to use it in your views. The method will give you from the images array, count number of images.

  helper_method :get_random_image
  def get_random_image(images, count)
    requested_images = []
    images_copy = images.clone
    [images_copy.size, count].min.times do
      index = rand(images_copy.size)
      requested_images << images_copy[index]
      images_copy.delete_at(index)
    end
    requested_images.flatten.compact
  end

here is an example how to use it.

<div id="static_logo" style="background:url(<%= get_random_image(@random_sales, 1) %>) no-repeat scroll left top;">
 

Future optimization

Put some caching, not to make

Dir["#{RAILS_ROOT}/public/#{web_root}/*.jpg"]
 

on every request.

10x Bl8cki to the nice code optimizations :)

http://railsenvy.com/2008/6/2/Railsconf-videos

Whats new for me was flog:

• http://on-ruby.blogspot.com/2007/12/flog-profiling-complexity.html
• http://ruby.sadi.st/Flog.html

Some more video links

ActionController::MethodNotAllowed

Only get, head, post, put, and delete requests are allowed.

The exception:

ActionController::MethodNotAllowed (Only get, head, post, put, and delete requests are allowed.):
    /usr/lib/ruby/gems/1.8/gems/actionpack-2.1.0/lib/action_controller/routing/recognition_optimisation.rb:65:in `recognize_path'
    /usr/lib/ruby/gems/1.8/gems/actionpack-2.1.0/lib/action_controller/routing/route_set.rb:384:in `recognize'

I got this error only when I access URL’s with param like

http://127.0.0.1:3000/dod/images/show_big_image/1639

I found that the problem was in the :id because without the :id the method was called correctly

This means that there is something with the routes.

Not working routes.rb: ….

  map.connect '', :controller => 'auth'

  # Install the default route as the lowest priority.
  map.connect ':controller/:action/:id'
  map.connect ':controller/:action/:sort_key/:sort_order'

it will work if you swap the last two lines….

  map.connect '', :controller => 'auth'

  # Install the default route as the lowest priority.
  map.connect ':controller/:action/:sort_key/:sort_order'
  map.connect ':controller/:action/:id'

It seems that it does reading the comments in the routes.rb is usefull. There is written:

# Install the default route as the lowest priority.

This error also occurs if you haven't restart your webserver. I know that there is no need to restart it but its true, try restarting and check.

Associations

http://www.workingwithrails.com/railsplugin/4801-has-many-polymorphs

Versioning of AR

http://github.com/fatjam/acts_as_revisable/tree/master

http://opensoul.org/2006/7/21/acts_as_audited

Scafolding

http://streamlinedframework.org/pages/about

Ajax pagination with JQuery

http://ozmm.org/posts/ajax_will_paginate_jq_style.html

Find_by_param is a nice and easy way to handle permalinks and dealing with searching for to_param values

http://github.com/bumi/find_by_param/tree/master

Asset Plugin – better than rails 2.0 integrated

http://synthesis.sbecker.net/pages/asset_packager

Image Magic

http://vantulder.net/rails/magick/

OpenID

http://wiki.rubyonrails.org/rails/pages/OpenidLoginGenerator

http://github.com/technoweenie/restful-authentication/tree/master

http://github.com/mrflip/

Model graph visualize

Article on franzens.org

• http://visualizemodels.rubyforge.org/
• http://rav.rubyforge.org/
• http://railroad.rubyforge.org/

Simple Captcha

http://expressica.com/simple_captcha/

Memcached stuff

http://townx.org/rails_and_memcached

Good rails 2.1 overview

memcached -vv -l 127.0.0.1 -p 11211 -m 256 -P /tmp/memcached.pid -u mongrel

memcached-tool 127.0.0.1

monitor the connections with the hidden option in the memcached-tool

echo $(($(netstat -nt | grep 11211 | grep -v WAIT | wc -l)/2)); ./memcached-tool 127.0.0.1:11211 dump > memdump; cat memdump

memcached-tool

alternative memcached client

PDF Output

http://ruby-pdf.rubyforge.org/pdf-writer/

http://rubyforge.org/projects/railspdfplugin/

Somone example report

Need to be checked: http://code.rubyreports.org/

Reporting

ruport & acts_as_reportable
some java reporting into rails

Sending Email

Inline email attachments plugin: http://flow.handle.it/past/2007/11/5/inline_attachment_now_official_rocks/

Wiki integration

http://github.com/queso/signal-wiki/tree/master

Repositories

http://github.com/mrflip/

Tutorials

Rails2.0 Video http://www.vimeo.com/425800

http://media.rubyonrails.org/video/rails_take2_with_sound.mov

http://akitaonrails.com/2007/12/12/rolling-with-rails-2-0-the-first-full-tutorial

http://akitaonrails.com/2007/12/12/rolling-with-rails-2-0-the-first-full-tutorial-part-2

Performance and Loging

http://austinentrepreneur.wordpress.com/2008/06/21/announcing-clientperf-simple-client-side-rails-performance/

web statistics

http://www.railstat.com/wiki/FAQ

http://haveamint.com/about/feature_highlights – not free

production log analyzers

webstat like: http://watson.rubyforge.org/

speed: http://github.com/wvanbergen/request-log-analyzer/wikis

speed: http://ckhsponge.wordpress.com/2006/10/11/ruby-on-rails-log-analyzer-rawk/

pl-analyse: http://seattlerb.rubyforge.org/production_log_analyzer http://seattlerb.rubyforge.org/production_log_analyzer

Open source rails projects

• Search engines
  • http://www.opensourcerails.com/
  • http://github.com/repositories
• E-Commerce solutions
  • http://code.google.com/p/substruct/
  • http://spreehq.org/demo
  • search google

Server setup

capistrano

• capistrano-multistage
• gem install seesaw – restart app without loosing connections
  • mongrel_rails seesaw::configure –server nginx

mod_rails

• http://www.sysadminschronicles.com/articles/2008/05/13/ubuntu-8-04-rails-server-using-passenger-part-2

nginx

• check my post
• gem install nginx_config_generator

]]> http://www.gudasoft.com/uncategorized/05/26/28/rails-plugins/2008/feed 1 http://www.gudasoft.com/english/development/rails-development/05/16/38/will_paginate-with-ajax/2008 http://www.gudasoft.com/english/development/rails-development/05/16/38/will_paginate-with-ajax/2008#comments Fri, 16 May 2008 15:25:55 +0000 admin http://blog.gudasoft.com/?p=38 It is very easy to handle ajax pagination as described on this post here.

I want to give one full example.

Here is how my form looks:

<% form_remote_tag :url => {
                      :action => 'handle_urls',
                      :script_id => @script,
                      :page => params[:page],
                    },
  :html => {:id => 'f'},
  :update => "filtered_articles_pane" do %>

Here is how my will_paginate helper looks:

<%= will_paginate @filtered_urls,
  :renderer => 'RemoteLinkRenderer',
  :remote => { :with => "'script_id=#{@script.id}&approved_flag='+$(\'approved_flag\')",
  :update => 'filtered_articles_pane'} %>

I have used the improved version of the will_paginate:

# Use it like so…
# will_paginate :collection, :remote => {:with => 'value', :update => 'some_div'} 

class RemoteLinkRenderer < WillPaginate::LinkRenderer
  def initialize(collection, options, template)
    @remote = options.delete(:remote)
    super
  end

  def page_link_or_span(page, span_class = 'current', text = nil)
    text ||= page.to_s
    if page and page != current_page
      @template.link_to_remote(text, {:url => url_options(page), :method => :get}.merge(@remote))
    else
      @template.content_tag :span, text, :class => span_class
    end
  end
end

Update for will_paginate 2.3.x

# app/helpers/remote_link_renderer.rb

class RemoteLinkRenderer < WillPaginate::LinkRenderer
  def prepare(collection, options, template)
    @remote = options.delete(:remote) || {}
    super
  end

protected
  def page_link(page, text, attributes = {})
    @template.link_to_remote(text, {:url => url_for(page), :method => :get}.merge(@remote))
  end
end

The new rails scaffolding is not good because:

• It is time taking to setup nested scaffold
• I have tons of uselss source code in the scaffolding like respond_to ... that is usable very rare or never.
• The HTML that is generated is ugly and not usable for CSS skin
• Not using the nice ruby style iterations .each instead of for's
• Code repetition, the “new” and the “edit” views has the same form elements
• Not easy to find documentation

I find Akita article for scaffolding. It is is great that he has covered some real cases. It is a lot of reading and I must read/copy/paste every time I need to make a scaffold. Here is step by step on making scaffold for administration.

• ruby script/generate scaffold admin::BadArticle NOT PLURAL!
  • user:references
  • description:text,string
  • fixed:boolean
  • timestamps are automaticaly added
• Add in routes.rb

  • map.namespace :admin do |admin|
      admin.resources :bad_articles
    end

• Model
  • Rename admin::BadArticles -> BadArticle,
  • move it to the model directory
  • rename the file
• Fix the migration file:
  • remove the prefix from the migration class,
  • remove the prefix from table name
  • rename the file
• URL references
  • admin_bad_articles_url
  • redirect_to([:admin, bad_article])
• Controller
  • rename all Admin::BadArticles -> BadArticle except in the controller name
  • Probably you will want to make your scaffold inhired your base admin controller

  • def create
       ...
       format.html { redirect_to([:admin, @filtered_url]) }
       ...
    end

  • def update
        ...
            format.html { redirect_to([:admin, @filtered_url]) }
        ...
    end

  • class Admin::BadArticlesController < ApplicationController

    class Admin::BadArticlesController < Admin::AuthController
      layout 'admin'
     (in case that you don't have it in the base controller)

  • def index
      @admin_bad_articles = BadArticle.find(:all)
      respond_to do |format|
        format.html # index.html.erb
        format.xml  { render :xml => @admin_bad_articles }
      end
    end

• Index.rhtml.erb

  • <td><%= link_to 'Edit', edit_admin_bad_article_path(bad_articles) %></td>

  • <%= link_to 'New bad_articles', new_admin_bad_articles_path %>

• edit.rhtm

  • <%= link_to 'Show', @bad_article %> |
    <%= link_to 'Back',bad_articles_path %><%= link_to 'Show', [:admin, @bad_article_url] %> |
    <%= link_to 'Back', admin_bad_articles_path %>

• show.html.erb

  • <%= link_to 'Edit', edit_filtered_url_path(@filtered_url) %> |
    <%= link_to 'Back', filtered_urls_path %>

• new.rhtml

  • <% form_for(@bad_article) do |f| %><% form_for([:admin, @bad_article]) do |f| %>

  • <%= link_to 'Back', bad_articles_path %><%= link_to 'Back', admin_bad_articles_path %>

Traps:

The order of the routes in routes.rb does matter! In order to make the REST work you must have this block at the bottom of your routes.rb like this:

map.namespace :admin do |admin|
  admin.resources :bad_articles
end

# Install the default route as the lowest priority.
map.connect ':controller/:action/:id.:format'
map.connect ':controller/:action/:id'


Remove simply_helpful plugin if you get the error:

undefined method `new_record?' for #Array:0x532a3e8

Debuging tools:

rake routes

Tips:

How to add custom actions to the REST

map.namespace :admin do |admin|
  admin..esources :bad_articles, :member => {:toggle => :get}
  admin.resources :orders, :member => { :resend => :post }
  admin.resources :users,  :collection => { :filter => :any }
end

Then in the controller:

def toggle
  @bad_article = BadArticle.find(params[:id])
  @bad_article.fixed = ! @bad_article.fixed
  @bad_article.save
  redirect_to  admin_bad_articles_url
end

And in the view:

<%= toggle_admin_bad_article_url(filtered_url) %>

More reading here

Resources:

• restful_rails_en
• Akita article
• http://frozenplague.net/2008/01/06/restful-routing-an-overview/

source: http://blog.teksol.info/archives/2007/3

class Contact < ActiveRecord::Base
auto_scope \
:old => {:find => {:conditions => ["born_on < ?", 30.years.ago]}},
:young => {:find => {:conditions => ["born_on > ?", 1.year.ago]}}
end

class Testimonial < ActiveRecord::Base
auto_scope \
:approved => {
:find => {:conditions => ["approved_at < ?", proc {Time.now}]},
:create => {:approved_at => proc {Time.now}}},
:unapproved => {
:find => {:conditions => “approved_at IS NULL“},
:create => {:approved_at => nil}}
end

Rails internals!?

http://localhost:3000/rails/info/properties

Threads

• nice post on custom thread handling
• spawn plugin
• the api